WeatherTuff

SealerCoat

  • About SealerCoat
  • Advantages of SealerCoat
  • Application
  • Application Method
  • Video
SealerCoat

SealerCoat is an elastomeric, flexible single pack waterproofing membrane made out of 100% pure acrylic polymers under the technical collaboration of M/s Insulating Paints Inc Australia. It is used to fill Hair line cracks on walls and terrace. It gives a smooth and sheen finish to all surfaces. It has been tested by G.E.R.I. Vadodara & National Test House Calcutta.

Application Method of SealerCoat

For R.C.C. & Cementitious surface & Asbestos sheet:
  • Surface Preparation: Clean the surface with adequate quantity of water. Make surface dust & grease free; remove all previous coatings which may have loose bond with the surface. If required, scrub with wire brush or use scrapper to remove old flake, chips & dust.
  • Filling of Cracks: Weather cracks are the cause of water/leakages thru wall and roofs of buildings. In case of a presence of prominent surface cracks please fill up the cracks with Diamond shield or any good quality crack filler before applying sealercoat
  • Primer Coat: Old, uneven and highly porous cement surface absorb essential polymers of Sealercoat. Hence-  apply one or two coats of Sealoxy Primer or any other water based Undercoat  for the best results and good finish.
  • Final Finish: Apply two Coats of Diluted Sealercoat with 15% water & should be applied with an interval of 3 to 4 hours between two coats.
For any metal Sheet:
  • Surface Preparation: Clean the surface and make it dust, grease & Oil free and then apply a coat of good quality zinc phosphate primer to avoid corrosion of the metal sheet.
  • Joint Filling: Between the overlaying joints of Galv. / Asb. Sheets, insert cotton bedding or gauze, soaked & dipped in undiluted Sealercoat for at least 2 inch in depth. (Length wise). Galvanized “J” bolts may be covered with cotton gauze dipped in undiluted Sealercoat & liberally wrapped around the bolt to cover sufficient area.


Coverage

On smooth surface,1Kg Sealercoat covers approximately 20 sqft in 2 coats

Packing Available;

1 kf, 5 kg, 18 kg,50 kg

Available Size
  • 1Kgs, 4Kgs, 18Kgs, 50Kgs

Quick Contact