WallCoat
- About Wall Coat
- Advantages of Wall Coat
- Application
- Application Method
Wall Coat is 100% pure Acrylic Wall Coating. It’s uses for Exterior Walls, R. C. C. Surface, Asbestos Sheets Slopping Roofs, Brick Walls etc. an acrylic emulsion based wallCoat, especially designed for exterior applications with superior resistance to fungus and dampness. It is recommended for use on new/freshly plastered walls, asbestos, concrete etc. It gives excellet astheci appeal to the surface finish of the walls.
Advantages of WallCoat
- It's elongation & flexible property makes surface waterproof & uniform.
- Breathing property of dry film has a better permeability to stay long against internal wall moisture.
- Can be applied very effectively where cracks have already developed.
- Resistance to dirt pick-up on the surface.
- Excellent resistance to U.V. rays for outstanding durability.
- Can be tinted to any pastel shade with universal stainers.
- Due to smooth film & Anti fungus additives, it stops the growth of algae & fungus on the coated surface for longer period.
- Excellent protection against chloride, sulphate & water vapour penetration from atmosphere. Resistance to mild Acid, Alkali & Salt vapours.
Application of WallCoat
Application Method of WallCoat
- Clean the surface thoroughly with water & remove the flakes of old paints or lime wash.
- Dilute it with max 10% water and apply first coat on water wetted surface (wall) with brush or spray.
- Second coat should be applied same as first coat dilution after minimum 4 hrs. time between 2 coats.
- If necessary, third coat should be applied for good opacity.
Coverage
35-40 sq.ft. in 2 coats on smooth surface.
It may vary depending upon substrates.
Available Size
- 1Kgs, 5Kgs, 20Kgs
_ProductImage_1315029358.png)
