TilleFix(N.S.A)
- About Tile Fix(NSA)
- Advantages of Tile Fix(NSA)
- Application
- Application Method
_ProductImage_1315029358.png)
Tile Fix is a single component grey/white colour powder made out of cement, Dry polymers & cellulose derivatives. It is recommended for fixing Ceramic tiles, Marbles & Mosaic tiles on exterior & interior surface of the wall & floor. It can also be used for fixing new tile on old tile surfaces.
Application Method of Tile Fix (N.S.A)
- The surface should be free from Oil, Grease, Fungus & Algae.
- Mix powder with water in ratio of 3 parts powder & 1 part clean water.
- Mix it thoroughly & make homogeneous paste.
- Apply this paste with notched trowel on substrate or apply this paste in the reverse side of tile.
- Press the tile up to 2 mm. of adhesive mortar thickness to make a good bond with the substrate.
- Remove the excess adhesive from the side of tiles.
- Clean the tiles with damp sponger or cloth.
- If the surface is very smooth then put diluted acid on the surface & then wash it thoroughly with water.
- It makes surface rough for good tile bonding.
- If surface is only or greasy, then wash it thoroughly with detergent solution followed by clean water.
Coverage
- 1kg/m2 for 1-mm thick layer
Available Size
- 20kgs bag
