| CATALOGUE » HYDRO SEAL - W |
| |
|
HYDRO SEAL - W is a combination of organic and inorganic components that reacts with Portland cement to produce more complete hydration. The increased hydration not only provides internal curing & a much denser cement paste, but also increases the early & ultimate strength of concrete thus produces highly durable impermeable concrete or mortar.
|
| |
| ADVANTAGES |
 |
| |
- Completely water tight cement concrete or plaster.
- Resist water penetration & absorption in to concrete & plaster surface.
- Prevents saltpetre action, effloreneces, dampness & fungal growth.
- Ensure complete Crystallisation of cement particles.
- Reduce water cement ratio, thus increase density & strength of the mix.
- Gives protection against vapours of acid & alkali.
|
| |
| USES |
|
| |
| Waterproofing, Damp proofing, Moisture ingress protection of rendering works in building or industrial structures like : |
- Basement, Septic tank, Damp proof Coarse (DPC), swimming pool, Underground or overhead water tank, floor exposed plaster etc.
- Structures exposed to heavy rain or under aggressive weather conditions.
- Repairing/maintenance of structures like wall, floor, roof screed or any other attacked areas which needs to protect from sweating, fungal attack.
|
| |
| APPLICATION |
|
| |
| It is necessary that HYDRO SEAL - W is to be added into cement exactly as recommended below, otherwise all efforts of water proofing qualities will gets fail. |
| |
| Mortar : |
| |
|
For plastering mortars or screed - HYDRO SEAL - W must be diluted with water for better dispersion in the proportion of 1:15 (HYDRO SEAL - W: WATER) and to be added in the desired cement / sand dry mix (eg: 1:6,1:2 etc) Necessary additional quantity of water should be added to get the desired consistency.
As a guideline - use only 200 gms. HYDRO SEAL - W for 1 bag (50kg.) of cement equivalent mix with dilution as recommended above.
|
| |
| Concrete : |
| |
|
HYDRO SEAL - W should be diluted with gauging (part of the mixing water) and then to be added in the wet mix during the process of mixing concrete .For best results, we recommend the following dosages.
200gms. 50 kg. cement - Where, Cement content is more than 350 kg. / m3
300gms. 50 kg. cement - Where, Cement content is less than 350 kg. / m3 |
| |
| CAUTION |
|
| |
- Never use Hydro seal-W directly in to the dry mix ingredients without dilution or adding any water.
- Shake well before use to get uniform homogeneous liquid.
- Avoid contact to eyes and skin.
|
| |
| Technical Specification |
|
| |
| Type |
Inorganic modified water proofing additive |
| Form |
Thick pasty liquid |
| Color |
White |
| Sp.GRavity |
1.1+0.02 |
| Conforms to |
IS: 2645-1975, IS: 9103. |
| Chloride |
Almost Nil |
| Setting time |
Normal |
| Strength |
Increased |
| Toxicity |
Non - Toxic but avoide inhaltion |
| Fire hazards |
Nil |
| Shelf Life |
18 months if stored in original unopened container & in cool dry place |
| Packing |
200gm,1kg, 5kg, 50kg, & 100kg., drum |
|
| |
| Note: |
|
Every reasonable care is taken in the manufacture of HYDRO SEAL-W products to ensure our highst quality standard. All recommendations, basic informations are given in good faith but without any warranty since the condition of use are beyound control. It is entirely responsibility of the use to make his own test to determine the suitability of the products for his own purpose under normal operating conditions. |
|
|
| |
|