Thirty five years of research experience by an Australian insulation technologist resulted in a remarkable ability to stop solar heat transfer.

INSULTEC is a range of coatings and membranes which by its application to the external surface of a building will re-radiate 95% of solar infra-red rays, and 85% ultra violet rays back into the atmosphere.

INSULTEC is a water based co-polymer compound containing inert pigments & special fillers. It is a one component system with excellent adhesion, micro porous, impervious to salt spray & air born pollution, mould & fungus resistant. INSULTEC has been thoroughly tested & is acclaimed by world authorities on heat transfer.

INSULTEC stops the accumulation of radiated heat, on the roof it self, as it re-radiate U.V. & I.R. rays. Hence conduction and convection reduces unimaginably. As a result it either eliminates the need for air conditioning altogether or greatly reduces its running costs.

For last 10 years INSULTEC is manufactured and distributed in INDIA under technical collaboration with Insulating Paints Pty. Ltd., Australia.

Conventional systems such as fiberglass batts, foam or reflective coatings, because of their lower thermal conductivity properties, slow the rate of Heat Transfer. They do not stop it. Throughout the day solar radiation transfers heat through the roof to the internal airspace, and the infrastructure below.

Once the heat is in, it is trapped, so even after the ambient temperature has dropped, the interior retains the heat. Thus requiring expensive energy consumption in the form of airconditioning.

Because INSULTEC stops the solar radiated heat accumulate on the surface itself, it either eliminates the need for air conditioning all together, or greatly reduces its running costs.

INSULTEC actually allows the inside air to cool at approximately the same rate as the outside ambient temperature.
Because INSULTEC re-radiates such a high percentage of solar heat, heat-stress problems related to concrete roofs and walls on multi-storeyed buildings are greatly reduced.

INSULTEC with its unique formula of resins, has a wide and varied application on Cementatious (RCC), galvanized and asbestos roofs, brick walls, tarpaulin and tapestry. IT CAN BE APPLIED BY BRUSH, ROLLER OR SPRAY.

INSULTEC membranes and coatings are also waterproof, scrub resistant, elastic and washable.

INSULTEC is a perfect coating for all residential buildings and complexes with Cementatious (RCC) surfaces, because of it's matchless protective properties.

INSULTEC is widely used as protective coating on bridges and other Roadworks in middle east. INSULTEC has shown excellent resistance towards water vapour transmission, water absorption, carbon dioxidediffusion and Chloride Ion Penetration. Test certificates are available on request.

INSULTEC also resists growth of algie and fungus and comes with inbuilt warrantee for many years.